| MATERIAL |
H-100
Thermosetting
Polyester
|
H-101
Thermosetting
Polyester
|
| CHARACTERISTICS |
Excellent chemical
resistance
Good abrasion and heat resistance
|
High heat resistance
Will not support
combustion
|
| SPECIFICATIONS |
L-P-516A, Class G1
MIL-P-77C, Class G1
UL 94HB (2)
|
L-P-516A, Class G1
MIL-P-77C, Class G1
UL 94VO (2)
|
| PROPERTIES |
ASTM
Reference
|
-
|
-
|
OPTICAL
Transmittance, %
Effect of Sunlight
Haze %
Refractive Index |
D1003 - 61
--
--
D542
|
87-89
SLIGHT
2-3
1.56
|
86-89
SLIGHT
2-4
1.55
|
PHYSICAL/MECHANICAL
Abrasion Resistance
Taber x Acrylic
Falling Emery x Acrylic
Hardness, Rockwell, M Scale
Impact Strength (ft lb/in)
(1/2" x 1/2" Notched Bar, Izod
Test)
Machining Qualities
Specific Gravity (Density)
Tensile Elastic Modulus (10^5 psi)
Tensile Strength (psi)
Compressive Modulus (10^5 psi)
Compressive Strength (psi)
Elongation, %
Flexural Elastic Modulus (10^5 psi)
Flexural Yield Strength (psi) |
D1044
--
D785
D256 - 66
--
D792
D638
D638
D695
D695
D638
D790
D790 - 66
|
3 - 5
2 - 4
91 - 95
.2
Good
1.23
3.5
3850 - 8000
6.5
26,000
1.5
2.00 - 4.40
6000 - 15000
|
3 - 5
2 - 4
91 - 95
.2 5
Good
1.38
4.3
5900
--
20,000
2.4
.51
86,000
|
CHEMICAL
Resistance Rating
to:
Weak Acids
Strong Acids
Weak Alkalies
Strong Alkalies
Organic Solvents |
D543
D543
D543
D543
D543
|
Excellent
Good
Excellent
Fair
Excellent/Good
|
Excellent
Good
Good
Fair
Excellent/Good
|
THERMAL
Burning Rate
Deflectin Temp. @264 psi Fiber Stress, (F)
Resistance to Heat - Continuous (F)
Specific Heat (Cal/gm -- C)
Thermal Conductivity (10^ -4 cal - cm/sec - cm^2 -- C)
Thermal Expansion (10^-5 in./in./C) |
--
D648 - 56
--
--
C177
D696
|
Low
183
200
.27
1.2
5.15
|
Self-extinguishing(3)
220
250
--
4.0
7.15
|
ELECTRICAL
Dielectric Constant, (10^3 cycles/sec)
Dielectric Strength, Short Time
1/8" Thickness, (volts/mil)
Dielectric Strength, Step-by-Step,
1/8" Thickness, (volts/mil)
Dissipation/Power Factor, (10^3 cycles/sec)
Surface Resistance(1) (10^11 ohms)
Arc Resistance, (sec) |
D150
D149
D149
D150
D257
D495
|
3.5
520
450
.015
1000
90 - 125
|
2.9 - 3.5
382
345
--
1000
3
|
(1) Measured with electrodes 10 inches apart at 500 VDC
(2) Underwriter's Laboratories, Inc. Flammability Classification
File # 53966
(3) At 1/8" thick
|
Homalite, Inc., assumes no obligation or liability
for any information furnished by it, or results obtained with
respect to these products. All such advice is given and accepted
at the buyer's risk. Users should be governed by their own tests,
made under conditions representative of those to which the product
wil be subjected in actual service.
|
